Bending Iron- medium, 2.4/3.0mm

Description

Medium plate bending iron to be used with the 2.4mm and 3.0mm Arthrex Ortholine plates

In order to contour the plate, place the appropriate cannulated, threaded, bending plug inserts into the locking screw holes where the plate will be contoured using the appropriate screwdriver. Contour the plate as necessary using bending irons or another form of plate benders, replicating the anatomy.

For bending of the tip/nose of the plate, use the “fork” end of the bending irons. Once the contouring is complete, the bending plugs can be removed or used in conjunction with K-wires