3.5mm TPLO Instrument Case

Description

The Arthrex 3.5mm TPLO instrument case allows the surgery team to put most of your 3.5mm TPLO instruments, plates, and screws into one case. The bottom of the case has a pin matting, providing room to store additional surgery items you require.

Product Features:

• A single case (VAR-4035C), which holds instruments and implants (both screws and plates)
• Designed to fit in an M11 autoclave or larger
• Empty screw caddy included (VAR-4035SC-01)

Dimensions

• VAR-4035C – Approximately 14.5 in x 8 in x 5.5 in
• VAR-4035SC-01 – Approximately 6.45 in x 3.78 in x 2.36 in

3.5mm Screw Caddy (VAR-4035SC-01)

Holds 4 locking and 4 cortical 3.5mm screws ranging from 16mm to 50mm.
There are also 5 blank lines at the bottom, screw length measurement and a secure place for your screw holding forceps (AR-8941F).
The screw caddy has a clear top to secure your screws in place when not in use.

Bottom Tray holds 

• 2.8mm Drill bit (VAR-4035D)
• TPLO Caliper (VAR-4000-CAL)
• Locking Drill Guide (VAR-4035DG)
• Non-Locking Drill Guide (AR-8943-14)
• 2.5mm Drill bit (AR-8943-30)
• Depth Device (AR-8943-15)
• T15 Screwdriver (AR-8943-10)
• T15 Driver AO Connect (AR-8941DH)

Top Tray holds 

• Eight 3.5mm TPLO implants (Small (L&R), Standard (L&R) and Broad(L&R))
• 3.5mm Plate Holder (AR-8954-07)
• Standard and Small Tissue Protector
• TPLO jig
• K-Wire, .092 in (2.3mm) (VAR-8967K)
• K-Wire, .062 in (1.57mm) (VAR-8941K)
• K-wire, .045 in (1.14mm) (VAR-8933K)
• Guide Pin .118 in (3.0mm) (VAR-13303-3.0)